Нові нормативні документи, що регламентують вимоги до інформаційних і керуючих систем, важливих для безпеки АЕС
ARTICLE PDF

Ключові слова

АЕС, безпека, інформаційні та керуючі системи, категорія сейсмостійкості, клас безпеки, нормативна база, нормативно-правовий акт, галузевий стандарт, функція безпеки

Як цитувати

Rozen, Y., & Yastrebenetsky, M. (2014). Нові нормативні документи, що регламентують вимоги до інформаційних і керуючих систем, важливих для безпеки АЕС. Ядерна та радіаційна безпека, (2(62), 50-68. Retrieved із https://nuclear-journal.com/index.php/journal/article/view/436

Анотація

Подано відомості про розроблені ДНТЦ ЯРБ проекти нових нормативних документів (нормативно-правового акта Державної інспекції ядерного регулювання України та галузевого стандарту Міністерства енергетики та вугільної промисловості України), які призначені для заміни НП 306.5.02/3.035 «Вимоги з ядерної та радіаційної безпеки до інформаційних і керуючих систем, важливих для безпеки атомних станцій».

ARTICLE PDF

Посилання

1. NP 306.5.02/3.035-2000. Requirements for Nuclear and Radiation Safety of Instrumentation and Control Systems Important to NPP Safety. (Rus)

2. NP 306.2.141-2008. General Safety Provisions for Nuclear Power Plants. (Ukr)

3. NP306.2.145-2008. Nuclear Safety Rules for Reactors of Nuclear Power Plants with PWR. (Ukr)

4. NP 306.2.106-2005. Requirements for Modification of Nuclear Installations and Procedure for Safety Assessment. (Ukr)

5. NP 306.5.02/2.068-2003. Requirements for Order and Contents of Lifetime Extension Measures for Instrumentation and Control Systems Important to NPP Safety. (Ukr)

6. NP 306.5.02/3.017-99. Requirements for Quality Assurance Program at All Stages of NPP Lifecycle. (Rus)

7. NP 306.5.02/3.076-2003. Requirements for Arrangement and Procedure of NPP Commissioning. (Ukr)

8. NAPB 03.005-2002 (VBN V.1.1-034-03.307-2003). Fire Protection. Fire Safety Regulations for Design of Nuclear Power Plants with WWER. (Ukr)

9. PNAE G-5-006-87. Seismic Design Rules for Nuclear Power Plants. (Rus)

10. IAEA SSR-2/2-2011. Safety of Nuclear Power Plants: Commissioning and Operation. Specific Safety Requirements.

11. IAEA SSR-2/1 2012. Safety of Nuclear Power Plants: Design. Specific Safety.

12. IAEA NS-G-1.1:2000. Software for Computer Based Systems Important to Safety in Nuclear Power Plants. Safety Guide.

13. IAEA NS-G-1.3:2002. Instrumentation and Control Systems Important to Safety in Nuclear Power Plants. Safety Guide.

14. IAEA NS-G-2.3:2001. Modifications to Nuclear Power Plants. Safety Guide.

15. IAEA DS-431. Design of Instrumentation and Control Systems for Nuclear Power Plants. Draft Safety Guide.

16. IEC 60780:1998. Nuclear Power Plants — Electrical Equipment of the Safety Systems — Qualification.

17. IEC 60880:2006. Nuclear Power Plants — Instrumentation and Control Systems Important to Safety — Software Aspects for Computer-Based Systems Performing Category A Functions.

18. IEC 60980:2007. Recommended Practice for Seismic Qualification of Electrical Equipment for Nuclear Power Plants.

19. IEC 60987:2007. Nuclear Power Plants — Instrumentation and Control Important to Safety. Programmed Digital Computers Important to Safety for Nuclear Power Plants.

20. IEC 61226:2009. Nuclear Power Plants — Instrumentation and Control Systems Important to Safety — Classification. Ed. 3.0.

21. IEC 61513:2011. Nuclear Power Plants — Instrumentation and Control Important to Safety — General Requirements for Systems.

22. IEC 62138:2005. Nuclear Power Plants — Instrumentation and Control Important for Safety. Software Aspects for Computer-Based Systems Performing Category B or C Functions

23. IEC 62340:2007. Nuclear Power Plants — Instrumentation and Control Systems Important to Safety - Requirements for Coping with Common Cause Failure (CCF).

24. DSTU ІЕС 60780:2007. Nuclear Power Plants. Electric Equipment of the Safety Systems. Qualification (ІEC 60780:1998, ІDT). (Ukr)

25. DSTU ІЕС 60880:2008. Nuclear Power Plants. Instrumentation and Control Systems Important to Safety. Software Aspects of Computer-Based Systems Performing Category A (ІEC 60880:2006, ІDT). (Ukr)

26. DSTU ІЕС 60987:2010. Nuclear Power Plants. Instrumentation and Control Important to Safety. Requirements for Design of Technical Means for Computer-Based Systems (ІEC 60987:2007, ІDT). (Ukr)

27. DSTU ІЕС 61226:2007. Nuclear Power Plants. Instrumentation and Control Systems Important to Safety. Classification of Instrumentation and Control Functions (ІEC 61226:2005, ІDT). (Ukr)

28. DSTU ІЕС 61513:2009. Nuclear Power Plants. Instrumentation and Control Systems Important to Safety. General Requirements for Systems (ІEC 61513:2001, ІDT). (Ukr)

29. DSTU ІЕС 62138:2008. Nuclear Power Plants. Instrumentation and Control Systems Important to Safety. Software Aspects for Computer-Based Systems Performing Category B or C Functions (ІEC 62138:2004, ІDT). (Ukr)

30. IEC 61000-4-2:2001. Electromagnetic Compatibility (EMC) — Part 4-2: Testing and Measurement Techniques — Electrostatic Discharge Immunity Test.

31. IEC 61000-4-3:2001. Electromagnetic Compatibility (EMC) — Part 4-3: Testing and Measurement Techniques - Radiated, Radio-Frequency, Electromagnetic Field Immunity.

32. IEC 61000-4-4:2001. Electromagnetic Compatibility (EMC) — Part 4-4: Testing and Measurement Techniques — Electrical Fast Transient / Burst Immunity Test. Basic EMS Publication.

33. IEC 61000-4-5:2005. Electromagnetic Compatibility (EMC) — Part 4-5: Testing and Measurement Techniques — Surge Immunity Test.

34. IEC 61000-4-6:2006. Electromagnetic Compatibility (EMC) — Part 4-6: Testing and Measurement Techniques - Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields.

35. IEC 61000-4-8:2001. Electromagnetic Compatibility (EMC) — Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test.

36. IEC 6100049:2001. Electromagnetic Compatibility (EMC) — Part 49: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test.

37. IEC 61000-4-10:2001. Electromagnetic Compatibility (EMC) — Part 4-10: Testing and Measurement Techniques – Damped Oscillatory Magnetic Field Immunity.

38. IEC 61000-4-11:2004. Electromagnetic Compatibility (EMC) — Part 4-11: Testing and Measurement Techniques — Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests.

39. IEC 61000-4-12:2001. Electromagnetic Compatibility (EMC) — Part 4-12: Testing and Measurement Techniques – Oscillatory Waves Immunity Test.

40. IEC 61000-4-14:2002. Electromagnetic Compatibility (EMC) — Part 414: Testing and Measurement Techniques – Voltage Fluctuation Immunity Test.

41. IEC 61000-4-16:2002. Electromagnetic Compatibility (EMC) — Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz.

42. IEC 61000-4-28:2002. Electromagnetic Compatibility (EMC) — Part 4-28: Testing and Measurement Techniques — Variation of Power Frequency, Immunity Test.

43. CISPR 22:2006. Information Technology Equipment — Radio Disturbance Characteristics — Limits and Methods of Measurement.

44. ISO 9001-2000. Quality Management Systems — Requirements.

45. DSTU ІЕС 61000-4-2:2008. Electromagnetic Compatibility (EMC) — Part 4-2. Testing and Measurement Techniques. Electrostatic Discharge Immunity Test (ІEC 61000-4-2:2001, ІDT). (Ukr)

46. DSTU ІЕС 61000-4-3:2007. Electromagnetic Compatibility (EMC) — Part 4-3. Testing and Measurement Techniques — Radiated, Radio-Frequency, Electromagnetic Field Immunity (ІEC 61000-4-3:2006, ІDT). (Ukr)

47. DSTU ІЕС 61000-4-4:2008. Electromagnetic Compatibility (EMC) — Part 4-4. Testing and Measurement Techniques – Electrical Fast Transient / Burst Immunity Test (ІEC 61000-4-4:2004, ІDT). (Ukr)

48. DSTU ІЕС 61000-4-5:2008. Electromagnetic Compatibility (EMC) — Part 4-5: Testing and Measurement Techniques — Surge Immunity Test (ІEC 6100045:2005, ІDT). (Ukr)

49. DSTU ІЕС 61000-4-6:2007. Electromagnetic Compatibility (EMC) — Part 4-6: Testing and Measurement Techniques — Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields (ІEC 61000-4-6:2006, ІDT). (Ukr)

50. DSTU ІЕС 61000-4-9:2007. Electromagnetic Compatibility (EMC) — Part 4-9: Testing and Measurement Techniques — Pulse Magnetic Field Immunity Test (ІEC 61000-4-9:2001, ІDT). (Ukr)

51. DSTU ІЕС 61000-4-10:2008. Electromagnetic Compatibility (EMC) — Part 4-10: Testing and Measurement Techniques — Damped Oscillatory Magnetic Field Immunity. (ІEC 61000-4-10:2001, ІDT). (Ukr)

52. DSTU ІЕС 61000-4-11:2007. Electromagnetic Compatibility (EMC) — Part 4-11: Testing and Measurement Techniques — Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (ІEC 61000-4-11:2004, ІDT). (Ukr)

53. DSTU ІЕС 61000-4-14:2008. Electromagnetic Compatibility (EMC) — Part 4-14: Testing and Measurement Techniques – Voltage Fluctuation Immunity Test (ІEC 61000-4-14:2002, ІDT). (Ukr)

54. DSTU ІЕС 61000-4-16:2007. Electromagnetic Compatibility (EMC) — Part 4-16: Testing and Measurement Techniques — Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz (ІEC 61000-4-16:2002, ІDT). (Ukr)

55. DSTU ІЕС 61000-4-28:2008. Electromagnetic Compatibility (EMC) — Part 4-28: Testing and Measurement Techniques — Variation of Power Frequency, Immunity Test (ІEC 61000-4-28:2002, ІDT). (Ukr)

56. DSTU CISPR 22:2007. Information Technology Equipment — Radio Disturbance Characteristics — Limits and Methods of Measurement (CISPR 22:2006, ІDT). (Ukr)

57. DSTU ISO 9001 2009. Quality Management Systems — Requirements (ISO 9001:2008, IDT). (Ukr)

58. NP 306.5.02/2.068-2003. Requirements for Order and Contents of Lifetime Extension Measures for Instrumentation and Control Systems Important to NPP Safety. (Rus)

59. GOST 30546.1-98. General Requirements for Machines, Devices and Secondary Technical Equipment and Methods to Calculate Seismic Resistance of Complex Structures. (Rus)

60. Yu. Rozen. Electromagnetic Compatibility of Instrumentation and Control System Components (1): Rules for Regulation and Assessment of Noise Immunity. Nuclear and Radiation Safety, 2007, No. 2. – P. 9-26. (Rus)

61. Yu. Rozen. Electromagnetic Compatibility of Instrumentation and Control System Components (2): Electromagnetic Noise Immunity. Nuclear and Radiation Safety, 2008, No. 4. – P. 58-76. (Rus)

62. DSTU 2465-94. Electromagnetic Compatibility of Technical Measures. Power Frequency Magnetic Field Immunity Test. Technical Requirements and Test Methods. (Ukr)

63. M. Yastrebenetsky, Yu. Rozen, G. Gromov, V. Inyushev, A. Nosovsky, M. Gashev, B. Stolyarchuk. Requirements for Instrumentation and Control Systems of Ukrainian NPPs Following Analysis of the Fukushima-1 Accident // Nuclear and Radiation Safety. — 2011. — No. 4. — P. 3—10. (Rus)

64. M. Yastrebenetsky, Yu. Rozen. About Safety Classification of Instrumentation and Control Systems and Their Components // Nuclear and Radiation Safety. — 2004. — No. 4. — P. 13—33. (Rus)

65. M. Yastrebenetsky, Yu. Rosen, S. Vinogradskaya, G. Jonhson, V. Eliseev, A. Siora, V. Skliar, L. Spector, V. Kharchenko; Nuclear reactors control and protection systems / Ed. M. Yastrebenetsky. — Kiev: Osnova-Print, 2011. — 768. — (Nuclear power plants safety).

66. GND 306.7.02/2.041-2000. Methodology for Assessing Compliance of Instrumentation and Control Systems Important to Safety of Nuclear Power Plants with Nuclear and Radiation Safety Requirements.